When you install a new computer, it often takes a few moments to connect the ethernet cable and the keyboard cable.
While that’s the normal process for most modern PCs, you may not have noticed that the gate latches on the etherboard are a little different.
As such, the computer will start up and you’ll see the door opening and the latches being pushed down.
This is a normal occurrence, but if you’ve installed an older computer that has a built-in gate latch, you might not notice it.
Fortunately, there’s a simple fix that can make this problem go away for a little while.
This article will show you how to fix your computer’s gate latch.
The article is based on the instructions provided by Windows 7 and Windows 8.1 users, but you can adjust them to suit your particular system.
Read more First, open the Start menu and navigate to Control Panel .
From here, you can either access it from the Start Menu, or you can open it in a new window.
In the new window, go to Device Manager.
In Device Manager, double-click on your ethernet adapter.
Select the device and then click Open.
Next, you’ll want to navigate to the Device Manager for your router, and click the Advanced tab.
Here, you should see two sub-tabs: the router type and the IP address for the router.
Next to the router, click on the Router and then Advanced tab to expand the fields.
This will let you enter the following information: The IP address of the device that you want to configure.